New

CAB Burs 5 pack : 6.0 mm Super Fine Attachment Finishing Burs

These exquisitely fine diamond burs have been specifically engineered to provide rapid and accurate tidying up of excess composite resin after placement of attachments associated with clear alignment therapy and for removal at the end of treatment.

The design and diminutive size allows the user to easily manoeuvre the bur around even the most delicate attachment shapes, ensuring that no residual resin is left on the enamel which may impinge on the seating of the aligner.

These burs are delivered in packs of 5 of 3.5mm length 

  • A Red band bur for rapid reduction and removal of excess resin

Instructions for Use of CAB system 

Finishing Attachments

After composite resin attachments have been placed and fully cured, identify any excess by visual inspection or by the use of ultraviolet LED.

Remove the blue CAB bur from the package with tweezers and place into a high speed turbine using finger pressure only. Gently wipe away the excess composite, trying to avoid touching the body of the attachment.

Once the excess has been removed, change to the red bur and polish the attachment-enamel interface.

Then swap to the super-fine yellow band bur and polish the enamel to a high lustre.

Removing attachments

Remove the blue CAB bur from the package with tweezers and place into a high speed turbine using finger pressure only. Gently wipe away the body of the composite attachment, until you get close to the enamel.

Once the body of the attachment has been removed, change to the red bur and polish the attachment completely away, back to the enamel surface .

Then swap to the super-fine yellow band bur and polish the enamel to a high lustre. Application of a topical fluoride is highly recommended.